Kodak DV-2500H instruction manual System Setting, Mode When Selecting CVBS/RGB/HDMI, Usb/Disc

DV-2500HEnglishforagon 2006.10.2511:6PM ˘ ` 16

BASIC OPERATIONS

SYSTEM SETTING

According to the system of the TV to be connected, set the system of the unit to make it match the TV.

In STOP mode, press SYSTEM button on the remote control, then choose TV TYPE.

• When you press the [SYSTEM] button, the TV screen shows	SYSTEM
the information as : “Press [SYSTEM] button again.” Press
the [SYSTEM] button again, the video out system changes
as follows.

NTSC

PAL

AUTO

V-MODE (WHEN SELECTING CVBS/RGB/HDMI)

• In case of connecting the component, press the V-MODE on	V-MODE
the remote control to select CVBS / RGB / HDMI. In case of
selecting HDMI, S-VIDEO signal is not output.

When you press the [V-MODE] button, the TV screen shows the information as : “Press [V-MODE] button again.” Press the [V-MODE] button again to change the video mode.

When you connect the Composite, picture is not displayed, press the

V-MODE on the remote control to select Composite video.

USB/DISC

Choose one between USB and disc (You can select one only	USB/CARD
that is inserted in).

• After inserting USB, press USB/CARD button on the remote control to select one between USB and disc.

•When you press USB/CARD button, the TV screen shows : DISC and USB

Move the cursor in the position of desired item by pressing [œ √…†] button and press PLAY button.

16