English
Before Operation - VCR part
Tuning in a video channel on your
TV
Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the DVD+VCR through the RF cable.
If you have used a SCART lead you will not have to tune your TV, simply select the AV channel.The AV channel is already
Perform the following steps only if interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area, or if you change the connection from RF connection to AV connection, or vise versa.
1 Turn on DVD+VCR and TV.
2 Set the vacant position 22 on your TV.
Press 1on the remote control to enter the standby
3 mode (the clock indicator will be dimmed).
Press and hold REW or FWD on the
4 DVD+ VCR for more than 4 secs.
RF 36 will appear in the DVD+VCR display.
The following picture will be displayed on the TV screen.
RF CHANNEL | 22 |
PSET | i |
R |
|
If the picture is snowy, move to step 5. If the picture is clean, press 1on the DVD+VCR to finish.
Press REW or FWD on the DVD+VCR to set the
5 video channel to a vacant position between 22 and 68 which is not occupied by any local station in your area.
Note
The RF channel will not change until step 6 has been executed.
Press 1to store the new RF video channel into the
6 DVD+VCR memory.
Now tune your TV set to the new DVD+VCR RF channel.
Note
If the TV picture was clear in step 4, do not retune your TV.
Using your DVD+VCR for the very first time
For the following steps we assume that you have just connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR incorporates the Automatic Channel Memory System (ACMS).This system will automatically tune and store TV channels in your DVD+VCR.
Make sure that you have correctly installed your
1 DVD+VCR.
Press 1to turn on your DVD+VCR.
If the initial Menu Screen doesn’t appear on screen, make sure that you have tuned your TV to a video channel. Or if this is correct it may mean that your DVD+VCR is already tuned.
D
ACMS
OK i | |
ACMS |
2 Press OK to start the automatic tuning process.
01 | C02 | 00 | |
02 | C03 | 00 | |
03 | C04 | 00 |
S | E |
i | |
ACMS |
Press SYSTEM MENU to remove the menus from
3 the TV screen.
12
