Kodak DVD755VR/05 Timer recording using On Screen Display

English

Operation with tape (Continued)

Timer recording using On ScreenDisplay

You may set up to seven timer record events within one

month of the current date.

Note

Before setting the timer make sure that you have set the

DVD+VCR clock correctly and you know which stations

you have tuned TV stations on your DVD+VCR.

Insert a video cassette with protection tab into your

DVD+VCR.

The video cassette should have the window side facing

up and the arrow facing away from you.

Press SYSTEM MENU.

Press 1or 2to select REC.

Press OK.

Press OK to start setting the timer record event.

If all timer record events are full press vorVto select

the event that you wish to remove and replace.

Press bto delete the event.

Press the numbered buttonsto enter the station that

you wish to record.

When selecting stations 1 - 9,press 0 first, then the

channel number;for example Stations 3 - 03.You may

also select Channels by pressing vor V.Once selected

press B.

If you wish to record from AUDIO IN (L/R) and VIDEO

IN on the front or from the EURO SCART sockets on

the back of your unit,press INPUT to select for correct

display (AV1,AV2 or AV3).

Press the numbered buttonsto enter the date of the

programme.

If you press OKbefore entering the date you may select

one of the following automated recording features.Use

1or 2to select,then press OK to confirm.

DLYTo record every day (except Saturday and Sunday)

at the same time.

SU ~ SATo record at the same time every week.

Press the numbered buttonsto enter the recording

start and end times of the programme that you wish to

record.

Please note your DVD+VCR uses a 24 hour clock.e.g.

1pm will be displayed as 13:00.

You may also select the start and end times by using vor

Press Bto select the recording speed.

Press vor Vto select the desired tape speed

(SP,IP,or LP).

IP mode determines how much tape is left and switches

speed from SP to LP,if necessary,to

complete recording the program.

Press SYSTEM MENU to set another timer record

event and follow steps 3 to 7.

Check that the timer event details are correct.

Press SYSTEM MENU twice.

If PLEASE CHECK is displayed,you have entered

incorrect and will need to re-enter the data.

Press 11to switch your DVD+VCR Standby.

TIMER will appear in the display window while your

DVD+VCR waits to make the recording.

To watch a DVD during timer recording standby mode,

press POWER and DVD to switch to DVD mode.

Notes

●If at a later date you wish to delete or change any of

the settings in timer event memory you may do so

without having to enter all the timer event information

again.Simply display the timer event screen. Use vor V

to select the event that you wish to deleteor change.

Press bto delete the event...or

Press OK to change;then press bor Bto select; Station,

Date,Start and End times and LP. Press vor Vto enter

the correct information.

●If Timer record events Overlap...

Make sure that the preset times of the timer recording

events do not overlap.If they do,the earlier programme

will always be given priority.

Example:

Programme 1 is programmed to start at 16:00 and end at

17:00.

Programme 2 is programmed to start at 16:30 and end at

17:30.

(In this case,Programme 1 will be recorded in its entirety,

but only the last 30 minutes of Programme 2 will be

recorded.)

PR DATE T I M E

- - - -

16 SP

- - - - SP

PR-01 - - - - - -- -~::

1900 20 00~::

- - - - - - - -~::

PR DATE T I M E

- - - -

16 SP

- - - - SP

PR-01 - - - - - -- -~::

1900 20 00~::

- - - - - - - -~::

PR DATE T I M E

- - - - SP

PR-01 16 - - - - - -- -~::

- - - - - -- -~::

- - - - - - - -~::

DLY SU MO TU WE TH FR SA

PR DATE T I M E

- - - -

- - SP

- - - - SP

PR-01 - - - - - -- -~::

- - - - - -- -~::

- - - - - - - -~::

PR DATE T I M E

- - - -

- - SP

- - - - SP

- - - - - - - -- -~::

- - - - - -- -~::

- - - - - - - -~::