Connecting to Optional
Equipment
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
Connect the Left and Right DVD/VCR AUDIO OUT or AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
Connect one of this unit’s DIGITAL AUDIO OUT jack
1 (COAXIAL) to the corresponding in jack on your amplifier. Use an optional digital (coaxial) audio cable.
You will need to activate this unit’s digital output. (See
2 “Digital Audio Output” on page 19).
Digital Multi-channel sound
A digital
Warning:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
Connections (Cont’d)
Notes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–To see the audio format of the current DVD in the
| VCR IN+OUT/DVD OUT | DVD/VCR | DVD |
|
| EXCLUSIVE | |
AERIAL |
| AUDIO OUT | OUT |
|
|
| AUDIO |
| EURO AV2 |
| OUT |
|
|
| |
| DECODER |
|
|
|
| R |
|
|
|
| R |
RF OUT | EURO AV1 | L |
|
| AUDIO/ |
| |
| VIDEO |
| L |
|
|
| |
DVD/VCR |
|
|
|
OUT |
|
|
|
|
|
| COAXIAL |
2 channel analog stereo or Dolby Pro Logic ll / Pro Logic connection
English
11
