Projector-Features
1Fan (air inlet)
2Focusing buttons
3Slide change buttons (forwards; backwards)
4 Remote Socket
5 Tray positioning index mark
6Lamp module
7 Air exhaust
8 Lamp module release
9 AC mains socket
10 Mains switch (electrical)
11 Fuse link compartment (primary circuit)
12 Voltage indicator
13 Fuse link
14 Fuse (primary circuit)
15 Focusing knob for gear rack lenses
16 Lever for slide tray positioning
17 Slide gate
18 Slide tray lock
19 Slide tray transport ring
20 Height adjustment foot
21 Retractable handle
Electrical Approvals and Conformity Mark
ElectricalApprovals
The KODAK EKTAPRO 320 Slide Projector complies with Inter- national Safety requirements and bears the following safety marks:
•UL (Underwriter Laboratories Inc.)
•CSA (Canadian Standards Association)
•VDE (Verband Deutscher Elektrotechniker)
CEConformityMark
Please note
•In case of extreme mains disturbances problems with lamp flashing and/or jamming may occur. In this case please switch the projector off and on again! In case of a jam, please refer also to „Possible problems during operation as written in the manual on page 22. (Please keep the tray position in mind before switching on the projector. With the random access function of the IR remote control or the rapid search via the reverse transport button you will easily come back to this position.)
•In case of an electrostatic discharge, the projector will execute a reset and the tray will be moved to the zero position.
Radiointerference:
EECdirective89/336
Australia standards AS 1044
RFS49ISSUESJuly1989
VCCI Regulations Nov. 1987 Class 2
Part 15 of FCC Rules Subpart J Class B
Using the instruction manual
Open the cover flap. Here you will find illustrations of the projector. The figures have also been incorporated into the operating in- structions to enable quick and exact identification of the individual projector features.
Action arrow:
Reference arrow:
Important texts are highlighted in grey.
WARNINGS are framed.
14
