Fitting the lens
Gear rack lenses:
Gear rack lenses (such as KODAK Slide
Spiral lenses:
Spiral grooved lenses are screwed clock- wise (from front of the projector) into the lens mount housing.
Leveling the projector
Push the 
(3) to project a slide.
.Turn the projector feet (20) to adjust the height.
Setting up the projector
Place the projector on a firm, vibration free base for stable and smooth operation.
For professional use we recommend the special projection racks available from deal- ers. The projector may be elevated plus or minus 30o from the horizontal along the projection axis.
Note: Operating the projector at its maximum angle setting may reduce the average lamp life time!
max. 30º
max. 30º
Important! Proper ventilation is required!
Check that the projector can
Keep air inlet (1) and air outlet (7) free from obstruction!
Focusing the image (manually)
The picture focus can be altered at any time during the projection by using the focus buttons (2) on the projector or the corre- sponding buttons on the remote control.
The first slide, at the beginning of every projection, must be focused by turning the knob for gear rack lenses (15) or by turning the spiral lens:
1. 2. 4.
3.
1. Slide positioning 4.
Press lightly the slide forward button 
(3). The first slide will move into the slide gate and will be projected.
2.Move the lens mount to the middle position
Repeatedly press the focus buttons (2) The lens and the focusing knob (15) will move. Press the focus button (2) until ...
4. Focusing
Fastening or mounting the projector
To reduce vibration or for secu- rity you will find fixing holes suitable for inserts (M5) in the baseplate of the projector (see figure).
a)with KODAK EKTAPRO Lenses or any other gear rack lens:
-by turning the focusing knob (15)
b)with spiral lenses:
-by turning the lens by hand.
18
