10 Setting preferences for your Acer handheld ShortCuts preferences
NOTE: The initialization string is dependent on the carrier hardware, rather than the type of phone.
6Tap OK.
7In the Confirmation screen, choose whether you want this configuration to be the default for your phone applications.
Setting up Phone preferences
Use the Phone Preferences panel to select the connection profile you configured in the Connection panel. These settings will be applied when you use Phonebook access and voice applications.
1 In the Phone Preferences panel, tap the Connection pick list.
Tap here.
2Select Infrared to GSM Phone or Serial to GSM Phone, according to your hardware setup.
The details of you connection should already be set up, based on what you picked in the Connection pick list. However, you can edit this information from this pick list.
If no connection methods are available, then None is shown in the pick list. This means that no phone drivers exist on your handheld. In this case you must install the phone driver on your computer then HotSync it to your handheld.
If your phone is enabled and connected, you can test the connection by tapping on the Test button. This initiates a simple query of the phone to make sure the connection is working and the correct phone is being used.
ShortCuts preferences
You can use the ShortCut preferences to create Graffiti ShortCuts of up to 45 characters. For example, you could create a ShortCut for your name or for the header of a memo. All ShortCuts you create appear on the list in the ShortCut Preferences dialog box and are available in any of your handheld applications. This list is backed up on your computer when you perform a HotSync operation.
268
