4 Working with your supplementary applications Using PhotoWiz

Working in Thumbnail mode

In Thumbnail mode, all available image files in the active image source are displayed in thumbnail format. Use the command buttons on this screen to perform different application tasks.

If a third party card reader is used to copy a source .jpeg file to a Memory Stick, instead of a thumbnail image, Photowiz will display a default file icon. In some cases, an inherent file icon, if one is available as in the case of image files captured using a digital camera, will be displayed instead of the PhotoWiz file icon.

NOTE: You must first select an image file before tapping any of the command buttons.

To open an image for select viewing

1Tap the thumbnail of the image you want to view in View mode.

2Tap View.

Screen shifts to show the processing status after which the selected image is displayed in View mode where the image is enlarged. For more information on this mode, refer to "Working in View mode" on page 130.

Tap here.

NOTE: While in the processing stage, you can press the scroll button on the front panel of your handheld to skip to another image. Pressing it down will display the next image in the current folder. Pressing it up will display the previous image. This also applies when image files are selected for Slide Show mode.

TIP: You can also double-tap a thumbnail to open it in View mode.

To display image in Slide Show mode

1Tap an image thumbnail.

2Tap Slide Show.

126

Page 138
Image 138
Acer s60, s50 Working in Thumbnail mode, To open an image for select viewing, To display image in Slide Show mode