Kodak G610 Docking and charging the camera, Docking the camera, Attach a custom camera insert see

2

Setting up your digital camera

Docking and charging the camera

Docking your digital camera lets you make prints directly from the camera, transfer pictures from the camera to the computer, and charge the camera battery.

This printer dock is ImageLink print-system compatible. You can dock not only Kodak EasyShare digital cameras, but other brands of ImageLink system-compatible digital devices.

NOTE: Not all cameras are compatible for charging on the G610 printer dock. See your camera user’s guide for dock compatibility.

Docking the camera

1Connect your printer dock power (see page 3) and

attach a custom camera insert (see page 2).

2 Load a Kodak Ni-MH rechargeable digital camera battery KAA2HR, or a Kodak Li-Ion rechargeable digital camera battery into the camera for charging. See your camera user’s guide.

NOTE: Your printer dock charges only Kodak Ni-MH KAA2HR and Li-Ion rechargeable batteries.

3 Place the camera on the printer dock. Push camera down to seat the connector.

The battery status light on the printer dock lights up if a rechargeable battery is in the camera, and an initializing message appears on the camera screen.

4Keep the camera strap clear of the paper path to the front and rear of the printer dock.

The camera is now powered by the printer dock instead of the camera battery.

www.kodak.com/go/support 7