Taking pictures/videos
www.kodak.com/go/support 16
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. For best results, place the camera on a tripod or steady surface.
You can turn on the self-timer using a shortcut (see page15) or these steps:
1Press the Menu button.
2Press to choose Self-timer/Burst, then press OK.
3Press to choose a Self-timer setting:
2 Seconds— A picture is taken after a 2-second delay.
10 Seconds— A picture is taken after a 10-second delay.
2 Picture Timer— The first picture is taken after a 10-second delay. A
second picture is taken 8 seconds later.
4Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
To take a video after a 2- or 10-second delay, use the same procedure but press the
Shutter button completely down while in video mode.
Using burst
Use the burst feature to take up to 3 pictures in rapid succession. You can turn on
burst using a shortcut (see page15) or these steps:
1Press the Menu button.
2Press to choose Self-timer/Burst, then press to choose Burst On.
3Press the Menu button to exit the menu.
4Compose the scene. Press the Shutter button halfway, then completely down
and hold it.
The camera stops taking pictures when you release the Shutter button, when pictures
are taken, or when there is no more storage space. Burst is unavailable in some modes.
2
10
2x