![The MinutdSecond Timer](/images/new-backgrounds/66535/6653525x1.webp)
The MinutdSecond Timer
The Minute/Second Timer has three timing functions:
●It operates as a minute timer.
“It mn be set to delay cooking.
●It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without microwave energy.
Using a Holding Time
The Minute/Second Timer can also be used to program a “holding time” between microwave cooking
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch number pads 3,0 and O (for 3 minutes and no seconds).
Step 3: Touch START. Display shows time counting down.
Step 4: When time is up, oven signals, flashes “End,” and display shows time of day.
Programming Delayed Cooking
To delay cooking up to 99 minutes and 99 seconds, touch the pad for the desired cooking function. For example, touch TIME COOK I & II and enter cook time. Touch MIN/SEC TIMER and enter number of minutes to delay cooking. Touch START. When
delaying a temperature cooking function which uses the temperature probe, be sure the probe is in food before touching START.
How to Defrost, Hold and Time Cook
Let’s say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook for 25 minutes. Here’s how to do it:
Step 1: Take casserole from freezer and place in oven.
n Step 2: Touch TIME DEFROST pad.
TIME
DEFROST
Step 3: Touch pads 1,5,0 and O for 15 minutes defrosting time. (Defrosting is automatically set on power level 3 but can be changed by touching the POWER LEVEL pad and the desired power level.)
Step 4: Set standing or hold time by H touching MIN/SEC TIMER pad.
Step 5: Touch pads 1,0,0 and O to hold for ten minutes.
Step 6: Touch TIME
m COOK I &11 pad.
Step 7: Touch 2,5,0 and O for 25 minutes of cooking time.
| Step 8: Touch START. As each |
START | function is automatically performed, |
moven display shows instructions entered and the function. When time is up, the oven signals and flashes “End.”
(continued next page)