Solution
■ Make sure the battery is charged and installed correctly (see page 1). Charge the Li-Ion battery whenever necessary.
■ Adjust the LCD Brightness setting (see page 34).
■ Transfer all pictures to the computer (see page 37). ■ Take another picture.
■ Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each picture is taken, based on picture size and content.)
■ Check the flash setting, and change as needed (see page 10). NOTE: The flash does not fire in all modes.
■ Transfer the pictures to the computer (see page 37).
■ Delete pictures from the card (see page 22) or insert a new card.
■ Make sure the correct battery type is installed (see page 50).
■ Wipe the contacts with a clean, dry cloth before inserting a battery in the camera.
■ Insert a new/charged battery (see page 1). Charge the Li-Ion battery whenever necessary.
www.kodak.com/go/support
Troubleshooting
Troubleshooting
Camera problems
Status
Camera does not turn on
Camera does not turn off
Camera buttons and controls do not function
LCD is too dark.
In Review, a blue or black screen is displayed instead of a picture
Pictures remaining number does not decrease after taking a picture
Flash does not fire
Memory card is almost or entirely full
Battery life is short
42
