Kodak M531 manual Direct printing Pictbridge enabled printer problems, Status Solution

		Troubleshooting
	Status	Solution
	You cannot take a	■ Turn the camera off, then on again.
	picture	■ Depress the Shutter button all the way (see page 6).
		■ Insert a new/charged battery (see page 1). Charge the Li-Ion
		battery whenever necessary.
		■ Memory is full. Transfer pictures to the computer (see page 37),
		delete pictures (see page 22), or insert another card.
	Memory card not	■ Card may be corrupted. Format the card in the camera (see
	recognized or camera	page 36).
	freezes with card	■ Use another memory card. Only SD or SDHC Cards are supported.
	Cannot find the	■ To view pictures on a card or in internal memory, see page 21.
	desired picture/video
Computer/connectivity problems
	Status	Solution

Slide Show does not run on an external video device

■Adjust the camera Video Out setting to NTSC or PAL (see page 35).

■Make sure the external device settings are correct. (See the device’s user guide.)

Computer does not communicate with the camera

■Turn off the camera, then turn it back on.

■Make sure the battery is charged and installed correctly (see page 1).

■Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is connected to the camera and the computer (see page 37). Then turn on the camera.

■See KODAK Software Help at www.kodak.com/go/camerasw.

Direct printing (PICTBRIDGE enabled printer) problems

Status	Solution
Cannot print to a	■ In the Setup menu, change the Computer Connection setting to
PICTBRIDGE Printer	Other Application (see page 36).
www.kodak.com/go/support		43