Kodak M577 Computer/connectivity problems, Picture quality problems, Troubleshooting, Status

		Troubleshooting
Computer/connectivity problems
	Status	Solution
	The software installer	■ Choose and install the right version for your computer at
	does not start	www.kodak.com/go/camerasw.
	Slide Show does not	■ Adjust the camera Video Out setting to NTSC or PAL (see
	run on an external	page 48).
	video device	■ Make sure the external device settings are correct. (See the
		device’s user guide.)

Computer does not communicate with the camera

■Turn off the camera, then turn it back on.

■Make sure the battery is charged and installed correctly (see page 1).

■Make sure the KODAK Camera USB Cable, U-8 is connected to the camera and the computer (see page 49). Then turn on the camera.

■See KODAK Software Help at www.kodak.com/go/camerasw.

Picture quality problems

Status	Solution
Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ Clean the lens (see page 59).
	■ Place the camera on a flat, steady surface or use a tripod (especially
	in high-zoom settings or in low light).
	■ Use a larger picture size (see page 46).
	■ If you’re manually adjusting the ISO speed, realize that high ISO
	setting may cause grainy pictures.

www.kodak.com/go/support 54