Kodak M577 manual Direct printing PICTBRIDGE enabled printer problems, taken in Smart Capture mode

Troubleshooting

Status	Solution
Picture is too dark	■ Reposition the camera for more available light.
	■ Use Fill flash (see page 16) or change your position so light is not
	behind the subject.
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Specifications, starting on page 57.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Program mode, adjust the Exposure Compensation (see page 20).
Picture is too light	■ Reposition the camera to reduce the amount of available light.
	■ Turn the flash off (see page 16).
	■ Move so that the distance between you and the subject is within the
	effective flash range. (See Specifications, starting on page 57.)
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the framing marks turn green, press the Shutter
	button completely down to take the picture.
	■ In Program mode, adjust the Exposure Compensation (see page 20).
Pictures that have	■ If PERFECT TOUCH Technology has been applied to a picture on the
KODAK PERFECT	camera, do not apply it again when the picture is on the computer
TOUCH Technology	(or on a KODAK Picture Kiosk).
	NOTE: PERFECT TOUCH Technology is automatically applied to Pictures
applied (twice) are
of lower image	taken in Smart Capture mode.
quality.
Direct printing (PICTBRIDGE enabled printer) problems
Status	Solution
Cannot find the	■ Use the Direct printing menu to change the image storage location.
desired picture

The Direct printing ■ Press any camera button to redisplay the menu. menu interface turns

off

55 www.kodak.com/go/support