NOTE: When you set gamut alarm to either “Destination” or “Simulation”, the puzzle pieces in the sockets are black.
To set gamut alarm:
NOTE: To use gamut alarm in the Simulation mode, be sure that you select the “Use simulation” check box.
1.Pull down the Gamut alarm list, and select either:
•“Simulation” to determine if the colors of the source transform are out of the gamut of the simulation device
or
•“Destination” to determine if the colors of the simulation or source device are out of the gamut of the destination device.
2.Create your color connector file.Refer to “Color Managing Multiple Sources.” When you print the file, any
3.To adjust the color representation in any
CONTENTS | INDEX | SEARCH | HELP |
Operator’s Guide
Printing
Guide
Color Management
Calibration
Network Interface Guide
Color Management Options
Using Color
Connector
Using PANTONE® Color