Kodak Exporting a Color Connector File to be a Printer Default, Contents, Index, Search, Help

Exporting a Color Connector File to be a Printer Default

After you create your connector file, do the following steps to send it to the printer as a default:

1.Make sure that you save the file.

2.From the File menu, select “Export As Printer’s Default”. The “Select Printer Model” dialog box appears.

3.Select the printer model from the drop-down list.

4.Click on OK.

NOTE: If this is the first time you have created a connector file, a dialog box appears asking you to locate the media file. Click onOK. Select “8670 Media V150” in the dialog box that appears. Click on Open.

CONTENTS INDEX SEARCH HELP

Operator’s Guide

Printing

Guide

Color Management

Calibration

Network Interface Guide

Color Management Options

Using Color

Connector

Using PANTONE® Color