Using Color Connector
This section describes how to use the Kodak Professional Colorflow ICC color connector (color connector) as an assembly tool to create color connector files.
System Requirements
Listed below are the hardware and software necessary to run color connector.
Macintosh Systems
•60 MHz PowerPC or higher processor with a minimum of 16 MB of memory. (A 150 MHz PowerPC 604e processor with 32 MB of memory is recommended.)
•Macintosh operating system 7.6.1 or higher operating system. (Macintosh operating system 8.0 is recommended.)
•a monitor with a minimum spatial resolution of 640 x 480 pixels.
•a video system with a minimum resolution of 256 colors.
Windows Systems
•60 MHz Pentium processor with a minimum of 16 MB of memory. (A 100 MHz Pentium processor with 32 MB of memory is recommended.)
•Windows 95, Windows NT 4.0 Workstation, or Windows NT 4.0 Server.
CONTENTS | INDEX | SEARCH | HELP |
Operator’s Guide
Printing
Guide
Color Management
Calibration
Network Interface Guide
Color Management Options
Using Color
Connector
Using PANTONE® Color
