KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector
32
Safety
These safety precautions include information to prevent personal
injury and damage to the projector.

Safety Definitions

Warni ng: Statements identify conditions or practices that could
result in personal injury.
Caution: Statements identify conditions or pract ices that could result
in damage to your equipment.
Warni ng: For information about use of a feature, please refer
to this User Guide.
Warni ng: Hot surface. Do not touch.

Projector Safety

Warni ng: To replace the lamp, turn off the power and unplug
the power cord. To avoid burns, wait 30 minutes before opening
the lamp door. Follow all instructions provided in this User
Guide. See “Changing the Lamp Module” on page20.
Warni ng: When you open the lamp module door, be careful not
to touch the hot surfaces inside.
Warni ng: Please use the power cord provided. Connect the power
cord to a receptacle with a protective safety (earth) ground terminal.
Warni ng: Don’t look directly into the lens when the lamp is on.
Doing so may cause eye injury.
Warni ng: Servicing your own projector may expose you to hazards
or create potential hazards. Also, servicing your own projector will
void the warranty. Refer all service to qualifi ed service per sonnel. See
“If You Need Assistance” on page5.
Warni ng: In the unlikely event of the bulb rupturing, thoroughly
clean the area behind the projector and discard any food that might
have been contaminated with broken glass.
Warni ng: Do not loosen or remove any screws other than those on
the lamp module door and the lamp module. Doing so may result in
electric shock.
Caution: Don’t set liquids on the projector. Spilled liquids may
damage your projector.
Caution: Don’t put the projector on a hot surface or in direc t sunli ght.
Caution: Do not drop the projector.