KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector
24
Troubleshooting
If you don’t find the answer to your problem here, visit our Web site
at www.kodak.com/go/projectors for the latest updates on
troubleshooting.

Power Indicator

The power indicator on the keypad provides you with information
about the condition of the projector.
Light Status Condition
Blinking Lamp is off but live power cord is
connected to the projector.
Projector is in standby mode.
OR
Lamp is off and fan is running.
Projector is cooling down.
Steady Lamp is on and fan is running.
Projector is ready.
Two blinks Scaling chip is malfunctioning.
Call KIC-D at 800-23kodak.
Three blinks RAM is malfunctioning.
Call KIC-D at 800-23kodak.
Four blinks I2C bus is malfunctioning.
Call KIC-D at 800-23kodak.
Five blinks Lamp is malfunctioning.
Call KIC-D at 800-23kodak.
Six blinks Fan is malfunctioning.
Call KIC-D at 800-23kodak.