Kyocera QCP 2035 manual Troubleshooting

Models: QCP 2035

1 47
Download 47 pages 20.97 Kb
Page 44
Image 44

d.Tilt the phone to remove the

battery. The ESN is visible after the

e

battery is removed. It should start

with “179-” or “B3-.”

 

Replace the battery as follows:

 

a. Extend the antenna.

d

b. Place the battery into the phone

c

with the metal contacts facing

 

down and towards the bottom of

 

the phone.

 

c.Lay the keypad flat inside the faceplate.

d.Align the slots in the phone to the posts on the faceplate.

e.Close until latched together.

f.Align the battery door to the grooves on either side of the phone.

g.Slide the battery door on while pressing down firmly, ensuring that the battery door clicks into place. Check and repeat if the battery door is not aligned. Do not force.

38

Troubleshooting

Page 44
Image 44
Kyocera QCP 2035 manual Troubleshooting