Kyocera QCP 2035 manual Extras, Messaging

Data/Fax Calls In

These settings tell the phone how to handle voice and data calls.

1.Select Menu 3 Settings 3 Network 3 Data/Fax Calls In.

2.Press to select an option:

•Voice Only—Allow only voice calls.

•Fax, next call—Set the phone to fax mode for the next incoming call or the next ten minutes.

•Data, next call—Set the phone to data mode for the next incoming call or the next ten minutes.

•Fax, until off—Force the phone into fax mode until the phone is turned off.

•Data, until off—Force the phone into data mode until the phone is turned off.

Extras

These settings allow you to program various options.

1-Touch Dialing

See “To use 1-Touch Dialing” on page 12.

Browser Prompt

You may receive a prompt whenever you attempt to start or exit the browser.

1.Select Menu 3 Settings 3 Extras 3 Browser Prompt.

2.Press to select an option:

•At Start—Prompt you when you start the browser.

•At End—Prompt you when you exit the browser.

•Both—Prompt you when you start the browser and exit the browser.

•No Prompts—You do not receive any prompts.

Messaging

The messaging settings allow you to set how you want to handle incoming and outgoing messages.

To change your voicemail number

You can change the phone number assigned to speed dialing location “1” by doing the following:

1.Select Menu 3 Messages 3 Msg Settings 3 Voicemail Number.

22 Settings