![](/images/backgrounds/202353/bg3f.png)
Troubleshooting
www.kodak.com/go/support 57
Computer/connectivity problemsBluetooth problemsStatus Possible Solutions
Computer does not
communicate with
the camera
■Insert a charged battery (page 1).
■Turn on the camera.
■Make sure the USB cable model U-8 is connected to the camera
and the computer (page 44). (If using an EasyShare dock, check
all cable connections. Make sure the camera is seated on the
dock.)
■Make sure EasyShare software is installed (page43).
Pictures do not
transfer to computer
■See Help in EasyShare software.
Slide Show does not
run on an external
video device
■Adjust the camera Video Out setting (NTSC or PAL, page33).
■Make sure the external device settings are correct. (See the
devi ce’s u ser’s guid e).
Light status Cause
Camera cannot
communicate with
another device.
■Make sure the antenna is not obscured, and the camera is
properly set up. (See Using Bluetooth wireless technology
features, page48.)
■Make sure the external device settings are correct. (See the
device’s user’s guide).
Bluetooth status lights
flash in succession
The camera’s Bluetooth radio is on; the camera is connecting to
another device.
Bluetooth status lights
flash in unison
The camera’s Bluetooth radio is on; the camera is sending/receiving.
Lights are off The camera’s Bluetooth radio is off; the camera is unable to
send/receive Bluetooth signals.