Kodak Z710 manual White Balance, Exposure Metering, Focus Zone, AF Control

	Doing more with your camera
Setting	Options
White Balance	Auto (default)—automatically corrects white balance.
Choose your lighting condition.	Ideal for general picture taking.
Available only in PASM mode.	Daylight—for pictures in natural lighting.
	Tungsten—corrects the orange cast of household light
	bulbs. Ideal for indoor pictures under tungsten or halogen
	lighting without flash.
	Fluorescent—corrects the green cast of fluorescent
	lighting. Ideal for indoor pictures under fluorescent lighting
	without flash.
	Open Shade—for pictures in the shade in natural lighting.
Exposure Metering	Multi-pattern(default)—evaluates lighting conditions
Evaluate light levels at specific	throughout the image to give an optimum picture exposure.
areas of a scene.	Ideal for general picture taking.
Available only in PASM mode.	Center-weight—evaluates the lighting conditions of the
	subject centered in the viewfinder. Ideal for backlit subjects.
	Center-spot—similar to Center-weight, except the
	metering is concentrated on a smaller area of the subject
	centered in the viewfinder. Ideal when you need an exact
	exposure of a specific area in the picture.
Focus Zone	Multi-zone(default)—evaluates 3 zones to give an even
Select a large or concentrated	picture focus. Ideal for general picture taking.
area of focus.	Center-zone—evaluates the small area centered in the
Available only in PASM mode.	viewfinder. Ideal when precise focus of a specific area in the
	picture is needed.
AF Control	Continuous AF—uses TTL-AF (Through-The-Lens). Because
Choose an auto-focus setting.	the camera is always focusing, there is no need to press the
	Shutter button halfway down to focus.
	Single AF (default)—uses TTL-AF when the Shutter button
	is pressed halfway down.
www.kodak.com/go/support		33