Kodak Z712 IS manual Direct printing PictBridge problems, Effective flash range

	Troubleshooting
If	Try one or more of the following
Picture is too light	■ Reposition camera to reduce the amount of available light.
	■ Turn flash off (page 9).
	■ Move so that the distance between you and the subject is within the
	effective flash range (page 9).
	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the AF/AE indicator turns green, press the Shutter
	button completely down to take the picture.
	■ If using P, A, or S mode, adjust Exposure compensation (page 36).
Picture is not clear	■ To automatically set exposure and focus, press the Shutter button
	halfway. When the AF/AE indicator turns green, press the Shutter
	button completely down to take the picture.
	■ Clean the lens (page 56).
	■ Make sure camera is not in Close-up/Macro mode if you are more
	than 27.6 in. (70 cm) from your subject. (Move further away if you
	are using the zoom lens in Close-up/Macro.)
	■ Place the camera on a flat, steady surface or use a tripod, especially
	in high-zoom settings or in low light.

Direct printing (PictBridge) problems

If	Try one or more of the following
Cannot locate desired picture.	■ Turn on the camera. Make sure the camera is
	accessing internal memory/card or Favorites.
	■ If you are using Direct print, use the menu to change
	the image storage location.
The Direct print menu interface	Press any button to redisplay the menu.
turns off.
Cannot print pictures.	■ Ensure that there is a connection between camera
	and printer (page 44).
	■ Ensure the printer and camera have power.

www.kodak.com/go/support 51