Kodak Z812 IS manual Care and maintenance, Video output-NTSC or PAL, PictBridge support-Yes

Appendix

Orientation sensor—For pictures and video

Video output—NTSC or PAL

Power—Kodak lithium digital camera battery CRV3; Kodak Li-Ion rechargeable digital camera battery KLIC-8000; AA lithium batteries; 3V AC adapter; EasyShare docks

Communication with computer—USB (PIMA 15740 protocol) via USB cable (U-8), EasyShare docks

PictBridge support—Yes

Self-timer—2 seconds, 10 seconds, 2-shot

White Balance—Auto, Daylight, Open Shade, Tungsten, Fluorescent Color modes—High Color, Natural Color, Low Color, Black & White, Sepia Date stamp—On, Off

Tripod mount—1/4 inch

Operating temperature—32–104° F (0–40° C)

Size—4.3 x 2.9 x 3 in. (10.8 x 7.4 x 7.6 cm) @ power off

Weight—11.6 oz (330 g) without card or battery

Care and maintenance

■If you suspect water has gotten inside the camera, remove the battery and card. Allow all components to air-dry for at least 24 hours before using the camera.

■Blow gently on the lens or LCD to remove dust and dirt. Wipe gently with a soft, lint-free cloth or an untreated lens-cleaning tissue. Do not use cleaning solutions unless designed specifically for camera lenses. Do not allow chemicals, such as suntan lotion, to contact painted surfaces.

■Service agreements may be available. Contact a dealer of Kodak products.

■For digital camera disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org.

www.kodak.com/go/support 61