1. | PREPARE | SITE |
|
|
| |||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||
ROUGHIN | PLUMING | NOTE: To | improve clarity the | |||||||
Shut off the | main | water supply | plaster guard dome is not shown in | |||||||
some of the illustrations | ||||||||||
If the bathing fixture has been | ||||||||||
|
|
| ||||||||
installed cover the fixture to | SUPPORT | FRMING | ||||||||
prevent damage | to | the | surfaces | Determine the location of the | ||||||
|
|
|
|
|
|
| ||||
Install or relocate | the | supply piping |
|
| ||||||
as necessary |
|
|
|
|
| showerhead valve and spout | ||||
|
|
|
|
| Install the | support framing | ||||
|
|
|
|
|
|
|
2. PREPARE VALVE
Carefully remove the stop nut | With Stops |
and stem assembly valve cap | Valve Body |
collar and pressure balancing unit | Pressure |
before applying soldering heat to | Balancing |
the valve body | Unit |
Stem | Stop | Valve | |
Assembly | |||
Nut | Cap | ||
| |||
|
|
Without Stops
Collar
Screws
3. INSTALL VALVE
NOTE: A valve with the stops installed is shown throughout the instructions
Install the valve on the support framing so the •UP" mark on the valve is facing upward
72" (182.9cm) - 78" (189.1cm) TO FLOOR (TYPICAL)
10" (25.4cm) Bath/Shower
lation
4" (10.2 cm)
72" (182.9cm) - 78" (189.1cm) (TYPICAL)
Shower
Installation
48" (121.9cm)
TO FLOOR
114552626CE | 4 | Kohler Co., Kohler, WI |