Thin Wall Installation (Fiberglass, Acrylic): Remove the plaster guard from the backing plate.
Twist the plaster guard dome to separate it from the outer ring. Discard the outer ring.
Slide the dome over the valve stem.
Provide a 4" (10.2cm) diameter hole in the finished wall material. Make openings for the stops (if included) by using the holes in the backing plate as a guide.
Secure the backing plate to the back of the wall material.
Do not remove the dome until instructed.
Backing
Plate
Plaster
Guard
Outer
Ring
Valve Stem
Dome
Backing Plate | Wall |
| Material |
UP | 4" |
| |
HOT | (10.2cm) D. |
| |
| Plaster |
| Guard |
2.3/4" (7cm) Rough.In Depth
Kohler Co., Kohler, WI | 7 | 114552.2.E |
|
|
