Kohler K-1375-RV, K-1375-L Technical Information, Required Electrical Service, Installation Notes

REVIVAL®

Technical Information

Fixture*:

Basin area:

Bathing area, bottom		40″ (1270 mm) x 27″ (686 mm)
Bathing area, top		61″ (1549 mm) x 32″ (813 mm)
Weight		165 lbs (75 kg)
To overflow:
Water depth		16″ (406 mm)
Capacity		90 gal (341 L)
* Approximate measurements for comparison only.
Pump:	kW	V	Hz		A
	1.5	240	50/60		15
Cut-out template				113311-7

Required Electrical Service

Dedicated circuit required, protected with Class A Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device (RCD):

Pump/control 220-240 V, 20 A, 50/60 Hz

Installation Notes

Install this product according to the installation guide.

Pump/piping protrudes beyond rim (see below). Maximum deck thickness should not exceed 2″ (50 mm).

Floor support under whirlpool must provide for a minimum of 44 lbs/square foot (214 kg/square meter) loading.

Hot water supply should be 70% of capacity or greater. Installations will vary.

If installing a rim-mount faucet, make sure there is no interference with drain overflow and circulating system before drilling any holes. Consult local and national codes for minimum air gap requirements if installing a spout on the faucet deck.

No change in measurements with drain

shown. (K-7167-AF)

Note: Pump/piping protrudes beyond rim.

Recommended faucet area.

4" (102 mm) Max

	1" (25 mm) Max		13-1/2"
			(343 mm)
	3" (76 mm) x 24" (610 mm)	36"	6-1/2"
			(165 mm)
	Flat Faucet Deck	(914 mm)
		72" (1829 mm)
42"	Pump/Control Access
(1067 mm)	34" (864 mm) W x		3-1/2" (89 mm)
	15" (381 mm) H Min
2-1/4"			22"
(57 mm)
			(559 mm)
	1-1/2" OD	3"	2-7/8"
			(73 mm)
		(76 mm)

Product Diagram

REVIVAL® 6’ EXPERIENCE BATH WHIRLPOOL WITH SPA/MASSAGE PACKAGE Page 2 of 2

1023248-4-E