Faucet Body
Hose Rubber
Washer
Escutcheon
Spacer
1. Install the Mounting Stud
Disconnect the hose from the hose connector.
Screw the mounting stud into the threaded hole at the bottom of the faucet body. The mounting stud should extend slightly beyond the threaded hole in the body.
1. Install the Escutcheon (Optional)
NOTE: For installation on marble, do not use plumbers putty. Use the
For 1-hole Installations:
The escutcheon, spacer, and
Insert the faucet tubing and hose into the hole.
For 3±hole Installations:
Apply a ring of plumbers putty to the underside of the escutcheon according to the putty manufacturer's instructions.
Insert the
Slide the rubber washer, escutcheon, and spacer
Insert the faucet tubing and hose into the center hole, carefully aligning the escutcheon.
Press down on the escutcheon and remove any excess putty.
Kohler Co. | 3 |