C PROTECT BATH UNIT
Position a clean drop cloth or similar material in the bottom of the whirlpool. Be careful not to scratch the surface of the product.
7 INSTALL THE WOOD RIM
NOTIC: Th wood rim | must | b | installd to | th |
| ||
bath bor any raming | is built | around th | bath | Wood Rim | |||
Do not us this wood rim in sunkn installations | |||||||
| |||||||
Install the bath, and make | the drain | connections. | Use |
| |||
two people for this procedure. Hold the wood rim | in |
| Rim racket Locations | ||||
position under the bath rim. Install | the angle brackets |
| |||||
to the wood rim, as illustrated, using #10 x 3/4" round0head screws. The holes are pre0drilled in the wood rim. Apply a bead of clear silicone sealant, as shown.
CAUTION:/Option | or | using |
| silicon |
| |||||
salant: Do not let the bath rest on the rim, or | ||||||||||
damage to the wood rim and the bath | will result. | |||||||||
The bath must be supported by the legs. |
| |||||||||
Install the bolts into the angle brackets, |
| as | shown, | to | ||||||
install the wood rim to | the | bath. | Loosely | assemble | all | |||||
the components. Tighten the bolts when they are |
| |||||||||
threaded | into the | bosses | on | the underside | of | the rim. | ||||
The bath | is | now | ready | for | framing, and | the | installation | |||
of the wall | material. |
|
|
|
|
|
|
| ||
NOT: The | bottom | of the wood Optiontrim | or |
|
| |||||
using silicon salant:be sealed with a bead of clear silicone sealant.
ath Rim
y on n
Wood Rim
olt
Screw
8 INSTALL THE TOWEL BAR
Attach the two end brackets to the bath rim with washers and bolts.
Carefully | slide | the | two | support brackets on the towel bar. | |||
Do not scratch | the | towel bar. | Position one | end | of the | ||
towel bar | into | an | end | bracket, | and attach | the | support |
brackets to the bath rim with washers and bolts. Only handtighten the bolts at this time.
Support Bracket
Fit the other towel bar end into the remaining end bracket. Align as needed.
Tighten all bolts. Secure the towel bar to all the brackets with setscrews.
Repeat for the other towel bar.
Setscrews
Bath Rim
Washer
Bolt
Towel Bar
Setscrew
End Bracket
Washer
Bolt
Kohler Co., Kohler WI U.S.A. | 6 | AB |
|
|
