Kohler K-T 45115 Install the Handles, Instale el surtidor cont, Installation Checkout, Kohler Co

Instale el surtidor (cont.)

Presione el botón tapón en la parte posterior del surtidor. El tapón botón debe estar al ras de la superficie del surtidor.

4.Install the Handles

Hot	Cold
Chaud	Froid
Caliente	Fría

Handle/Poignée/Manija

Apply plumbers putty.

Appliquer du mastic de plombier. Aplique masilla de plomería.

Screw/Vis/Tornillo

Brass Spline Adapter

Adaptateur à cannelures en laiton Adaptador de ranuras de latón

Height Measurement

Hauteur

Medida de la altura

Remove the plaster guards.

Handle Orientation

Orientation de la poignée

Orientación de la manija

Plastic Spline Adapter

Adaptateur à cannelures en plastique Adaptador de ranuras de plástico

Valve Stem

Tige de valve

Espiga de la válvula

Finished Surface

Surface finie

Superficie acabada

Measure the distance from the top of the valve stem to the finished surface.

For a valve stem height between 1-13/16″ (4.6 cm) and 2-1/8″ (5.4 cm) use a brass spline adapter and screw. For a valve stem height between 2-1/8″ (5.4 cm) and 2-5/16″ (5.9 cm) use a plastic spline adapter.

If the brass spline adapter is required, attach using the screw supplied. The plastic spline adapter slides on with no attachment.

Position the handle assemblies facing in opposite directions away from the spout.

NOTE: The spline adapter allows fine adjustment of the handle alignment. To adjust, remove the handle and reposition the spline adapter.

Align the handle.

Reinstall the handle and check alignment.

Installation Checkout

With the handles in the closed position, turn on the main water supply.

Check for leaks. Adjust as needed.

Kohler Co. 7 1158791-2-B