Manuals / Kohler / Household Appliance / Plumbing Product

Kohler K3423, K3427, K3429, K3428, K3422 Remove the Existing Toilet, Scrape off the old wax seal

Models: K3422 K3423 K3428 K3429 K3427

1 20
Download 20 pages 63.59 Kb
Page 3
Image 3
Scrape off the old wax seal.

T-Bolt

Scrape off the old wax seal.

Closet

Flange

1. Remove the Existing Toilet

CAUTION: Risk of hazardous gases. If the new toilet is not installed immediately, temporarily place a rag in the closet flange.

Turn off the water supply.

Flush the toilet.

Sponge out all remaining water from the tank.

Disconnect the supply shut-off valve, if present.

Remove the old toilet.

Remove the old wax seal from the floor with a putty knife. Replace the old T-bolts with the new 5/16″ diameter T-bolts.

Kohler Co.

3

1004604-2-G

Page 2 Page 4
Page 3
Image 3
Kohler K3423, K3427, K3429, K3428, K3422 manual Remove the Existing Toilet, Scrape off the old wax seal
Page 2 Page 4

FAQ

What precautions should be taken when removing an old toilet?

Before removing the existing toilet, be sure to turn off the water supply, flush the toilet, and disconnect the supply shut-off valve if present. Also, sponge out all remaining water from the tank.

How should the old wax seal be removed?

The old wax seal can be scraped off the floor with a putty knife. Be sure to replace the old T-bolts with the new 5/16 diameter T-bolts.

What is a closet flange?

A closet flange is the piping component that connects the toilet to the drain pipe on the floor. It is important to ensure that the closet flange is in good condition before installing a new toilet.