Kohler K3422, K3427, K3429, K3428, K3423 manual Bottom of Bowl, Install the New Toilet

Wax Seal

Bolt Cap

Nut

Bottom of Bowl

Bolt Cap Base Washer

Closet Flange

T-Bolt

T-Bolt

2. Install the New Toilet

Install or relocate the supply and outlet as necessary to conform to the roughing-in dimensions.

Install a supply shut-off valve.

Lay the toilet down onto a padded surface.

From the bottom of the toilet, firmly press a new wax seal around the toilet outlet.

Remove the temporary rag (if used) from the toilet flange hole.

Align and lower the toilet over the flange and T-bolts.

IMPORTANT! Do not lift or rock the bowl after placement. If you break the watertight seal, you must install a new wax seal.

Apply your full body weight around the toilet to set the seal.

Place the bolt cap bases over the T-bolts in the ″up″ position as marked.

Place the washers and nuts on the bolt cap bases and T-bolts.

IMPORTANT! Do not overtighten the nut. Overtightening may cause breakage or chipping of vitreous china.

Carefully tighten the nuts.

IMPORTANT! Risk of product damage. Protect the vitreous china from the saw blade when cutting off excess T-bolt length.

1004604-2-G 4 Kohler Co.