Tank Bolt
| Tank |
|
Tank Bolt | Tank |
|
Gasket | Tank | |
| Bowl Inlet |
|
| Viewing The |
|
Washer | Assembly From |
|
Gasket | Under The Tank |
|
Brass Nut |
|
|
3. Install the Tank
IMPORTANT! Risk of product damage. Overtightening the tank bolts may cause breakage or chipping of the vitreous china.
Remove the nuts and washers from the preassembled tank bolts on the bottom of the tank.
Set the nuts and washers aside.
Position the tank on the bowl by centering the gasket on the bowl inlet.
Assemble the washers and nuts to the tank bolts.
Tighten the nuts until snug.
Verify that the tank is level both left to right and front to back. Make sure the nuts are tight enough to achieve a watertight seal.
6 | Kohler Co. |
