Cover
Screw Batteries
Control Unit
| Battery Compartment |
|
|
Replace the Batteries |
|
|
|
Battery Indicator Activity |
|
Flash Rate | Effect |
No flash. | The batteries are fully operational. |
Single flash. | A user is present. The batteries are fully |
| operational. |
Repeated flash. | The batteries will need to be replaced. |
Flash every 2 seconds. | The sensor has deactivated. The batteries |
| will need to be replaced. |
|
|
Replace the Batteries |
|
NOTE: The urinal will not need reprogramming after the batteries have been replaced.
Lift the control unit out from the tank.
Using a Phillips screwdriver, remove the four screws from the cover of the battery compartment. Set the four screws and cover aside.
Note the negative and positive position of the batteries in the battery compartment.
Remove the existing batteries.
Replace the batteries with 4 alkaline AA batteries.
Reinstall the cover to the battery compartment.
Place the control unit back into the tank.
Kohler Co. | 3 |