Shower Elbow
Apply plumbers putty to Escutcheon.
Shower Arm
Setscrew
Showerhead
2. Install the Showerhead
NOTICE: Do not use thread sealant compound (pipe dope) on the shower arm threads. Instead, use thread sealant tape on the shower arm threads. This will avoid clogging the showerhead spray outlets.
Remove the temporary nipple from the shower elbow.
Apply a bead of plumbers putty or other sealant to the back of the escutcheon according to the putty manufacturer’s instructions.
Slide the escutcheon over the shower arm.
Apply thread sealant tape and install the shower arm to the shower elbow.
Carefully tighten with a clean strap wrench.
Press the escutcheon against the finished wall and secure with the setscrew.
Remove all excess putty.
Turn the main water supply on.
Run hot and cold water through the shower arm to flush out dirt and debris.
Apply thread sealant tape to the shower arm and thread the showerhead to the shower arm.
4 | Kohler Co. |