Valve
Valve
Faceplate
Screw
Handle
Sleeve
Screw
Handle
Plug Button
Graphics Ring
4. Install the Faceplate and Handle
Remove and discard the plaster guard and/or dome, if installed.
Rotate the valve stem fully counterclockwise to the ″OFF″ position.
Install the faceplate onto the valve so the notch is to the bottom and secure with screws. Do not overtighten the screws.
Install the graphics ring to the faceplate, and rotate it clockwise to lock it in place.
Fit the sleeve onto the valve.
Secure the handle in place with the screw.
Press the plug button firmly into place.
6 | Kohler Co. |
