VX3100A
Using the Battery Pack
Note: It is important to charge the battery fully before the initial use of the phone.
The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time when using the phone.
Installing the Battery
To install the battery, insert the bottom of the battery into the opening on the back of the phone. Then push the top of the battery down until the latch clicks.
Removing the Battery
Turn the power off. Lift the release latch to detach the battery.
Release latch
Slot
VX3100A
Battery Charge Level
The battery charge level is shown at the top right of the LCD screen.
When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying LOW BATTERY WARNING! If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.
Using the Desktop Charger
The desktop charger has a slot for recharging batteries that accommodates the phone and battery for charging.
Warning! Use only the desktop charger provided with the phone. Using an unauthorized charger may damage your phone or battery.
1.Plug the charger into a wall outlet. The phone must be charged from a 120 Vac power source.
2.Insert the phone with an installed battery or the battery by itself into the slot of the charger.The red light indicates the battery is charging and the green light indicates the battery is fully charged.
The charge time varies depending upon the battery level. The maximum charge time for a fully discharged battery is 3 hours.
GETTING STARTED
14 | 15 |
