LG Electronics VX3100A manual Key Tone Menu, Ring Type Menu, Ring Volume Menu, Ear Volume Menu

VX3100A

Key Tone (Menu )

To set the Key Tone length and touch tone playback speed:

1.Press Soft Key 1 Menu.

2.Press Settings.

3.Press Sounds and then press Key Tone.

4.Set Normal / Long with and press Soft Key 1 Ok.

Normal Sends out a tone for a fixed period of time even if you keep the key pressed.

Long Sends out a continuous tone for as long as you keep the key pressed.

NOTE: Use the side key buttons. The upper button increases the volume and the lower button decreases the volume.

NOTE: Dual-Tone Multi Frequency (DTMF) Signaling works by the simultaneous transmission of two tones, one from a group of low frequencies and another from a group of high frequencies. Each group of frequencies consists of four frequencies. Setting Key Beep length to long extends the DTMF tone. Press Menu, then Key Tone Using then Long. Press Soft Key 1 Ok.

VX3100A

Ring Type (Menu )

1.Press Soft Key 1 Menu.

2.Press Settings.

3.Press Sounds and then press Ring Type.

4.Select one of six ring types Ring, Vibrate, Vib1+Ring,

Vib2+Ring, Vib3+Ring and Lamp with .

NOTE: The number after Vib means the number of vibrations.

5. Press Soft Key 1 Ok to save the ring type.

Ring Volume (Menu )

1.Press Soft Key 1 Menu.

2.Press Settings.

3.Press Sounds and then press Ring Volume.

4.Adjust the volume of the ringer or level of the vibrate

with .

5.Press Soft Key 1 Ok to save the ring volume or vibrate level.

Ear Volume (Menu )

1.Press Soft Key 1 Menu.

2.Press Settings.

3.Press Sounds and press Ear Volume.

MENU FEATURES

82 83