VX3100A
Advanced Phone Book
Features
Pause
When you call automated systems such as voicemail or credit billing numbers, you often have to enter a series of numbers. Instead of entering these numbers by hand, you can store the numbers in your phone book separated by pauses using special characters (H, T)
There are two different types of pauses that you can use when storing a number; hard and
Hard Pause (H)
The phone stops dialing until you press Soft Key 1, Resume to advance to the next number.
The phone waits two seconds before sending the next number.
Storing a number with pauses
1.Enter the phone number.
2.Press Soft Key 1 Option.
3.Select hard or
4.Enter additional number(s) (e.g., pin number or credit card number).
5.Press Soft Key 1 twice and the
6.The phone prompts you for the memory location where the number should be saved. Press Soft Key
VX3100A
1 Next to automatically store the number in the first available memory location, or enter a specific three- digit memory location and then press Soft Key 1 to store the number.
7.Select the desired description: Home, Office, Mobile,
Pager, or Data/Fax by using 
.
8.Enter a name for the phone number (up to 16 characters). If you do not want to enter a name, go to the next step.
9.You may select the desired ID ring type and secret
setting using 
.
10.Press Soft Key 1 Save, a confirmation prompt is displayed.
Prepending a Stored Number
Prepend can be used if you are out of your home system area and need to add the area code to an existing phone book number. When a phone book entry or message callback number shows up on the display, you can add to the beginning of the original number. However, you cannot edit the original number.
1.Recall a number in memory.
2.Enter the prepend digits and the phone number.
3.Press 
.
ADDITIONAL FUNCTIONS
46 | 47 |
