|
|
| Operating the Remote Control | |||
Power | Use the Power button to turn the portable air conditioner on and off. | |||||
|
|
| By default when you first use the power button, the unit will begin to | |||
|
|
| operate in cooling mode. The unit will remember the last used | |||
|
|
| mode/settings if you shut down and restart. | |||
|
|
| ||||
|
|
| will restart itself in its last used mode/settings once power is | |||
|
|
| restored. The compressor will restart after 3 minutes. | |||
|
|
|
|
|
| |
Cooling Mode | Cooling mode cools and dehumidifies the air. If the ambient | |||||
|
|
| temperature drops below the temperature you selected, the | |||
|
|
| compressor turns off and the unit functions with the fan only. When | |||
|
|
| the temperature rises above the temperature you selected, the | |||
|
|
| compressor turns on again. | |||
|
|
| Whether your desired temperature can actually be reached | |||
|
|
| depends on the ambient conditions. The room temperature | |||
|
|
| remaining above the set temperature is normal. | |||
|
|
| To operate the unit in cooling mode: | |||
|
|
| 1) Make sure the power cord is plugged into a power outlet. | |||
|
|
| 2) Press the Power button on the remote. | |||
|
|
| 3) Press the Mode button until the Mode Indicator Light on the | |||
|
|
| Control Panel turns blue. | |||
|
| NOTE: The exhaust hose | 4) Select the fan speed by using the Speed button. | |||
|
| must be used in Cooling | 5) Set the thermostat by using the Up and Down buttons. The | |||
|
| mode in order to cool a | thermostat is adjustable between 61°F - 89°F in one degree | |||
|
| room. | increments. You can switch between Fahrenheit and Celsius by | |||
|
|
| pressing the ºC / ºF Button | |||
|
|
|
|
| ||
Dehumidifying Mode | During the Dehumidifying mode, the unit will condense water out of | |||||
the air and exhaust it through the exhaust hose. The ambient | ||||||
|
|
| ||||
|
|
| temperature in the room will probably drop by a few degrees while | |||
|
|
| using the Dehumidifying mode. |
To operate the unit in dehumidifying mode:
1)Make sure the power cord is plugged into a power outlet.
2)Press the Power button on the remote.
3)Press the Mode button until the Mode indicator light turns amber on the Control Panel.
NOTES: If the room temperature is below 77ºF, the fan will always run on low speed while in the Dehumidifying mode. If you do not use the exhaust hose in Dehumidifying mode, you must manually drain the water from the unit. Additionally, the ambient temperature in the room will probably rise by a few degrees if you do not use the exhaust hose. You will be not be able to change the thermostat temperature or fan speed while in Dehumidifying Mode.
13