|
| Using the Control Panel |
| |
LCD Display | The LCD Display will show the ambient temperature by default. |
| ||
Pressing the Up and Down buttons on the remote control will show |
| |||
|
|
| ||
|
| the set temperature for 15 seconds, and then revert to the room |
| |
|
| temperature. You can switch between Fahrenheit and Celsius by |
| |
|
| pressing the C/F button on the remote control. The displayed range |
| |
|
| of the ambient temperature is from 0º to 99º. Temperatures above |
| |
|
| 99º will be displayed as “Hi”, and temperatures below 0º will be |
| |
|
| displayed as “Lo”. If you enabled the Timer, the LCD Display will |
| |
|
| show the hour(s) set. |
| |
|
|
|
|
|
Mode Indicator Light | The Mode indicator light on the control panel changes color to |
| ||
indicate the mode you selected with the remote control: |
| |||
|
| • Blue light: The unit is in cooling mode. |
| |
|
| • Amber light: The unit is in dehumidifying mode. |
| |
|
| • Green light: The unit is in fan mode. |
| |
|
|
|
|
|
Power Button | Use the Power button to turn the portable air conditioner on and off. |
| ||
|
| By default when you first use the power button, the unit will begin to |
| |
|
| operate in cooling mode. The unit will remember the last used |
| |
|
| mode/settings if you shut down and restart. |
| |
|
|
| ||
|
| will restart itself in its last used mode/settings once power is |
| |
|
| restored. The compressor will restart after 3 minutes. |
| |
|
|
|
| |
Water Full Light | In high humidity situations, the internal water reservoir may fill. The |
| ||
unit will automatically shut off and the water light will turn on. Once |
| |||
|
|
| ||
|
| the water is manually drained, the unit will operate normally. |
| |
|
|
|
| |
Remote Control Sensor | The remote control sensor receives infrared signals given by the |
| ||
|
| remote control. |
|
11