- 3 -

Using the appliance safely:

In the event of danger, immediately remove the
power plug from the wall socket.
Never use the appliance for purposes other than
those for which it was designed.
Remove the power plug from the wall socket
when the appliance is not in use, when you re-
move parts and before cleaning the appliance.
Do not use the appliance outdoors.
Appliance description
qLid
wLarge squeezing cone
eSmall squeezing cone
rUpper fruit pulp sieve
tFruit pulp regulator
yLower fruit pulp sieve
uJuice collector
iDrive axle
oPower cable with power plug
aAppliance plinth
sPower cable storage
Set-up and assembly of the appliance
Important:
Ensure that the power plug is not in the power
socket before assembling the appliance. Otherwise
there is a risk that the appliance could start
unintentionally.
1. Unwind the power cable ocompletely from the
cable storage sand secure it in the lateral
recess on the appliance plinth a.
2. Place the appliance plint h aon a level and
slipfree surface.
Note:
Rinse all removable components thoroughly before
the first usage of the appliance (see chapter
"Cleaning and care").
3. Place the juice collector uon the dr ive axle i
of the appliance plinth aand turn it clockwise
as far as it will go.
4. Place both par ts of the fruit pulp sieve r/y
into each other so that the fruit pulp regulator t
protrudes through the recess. Both parts must
audibly engage.
5. Place the assembled fruit pulp sieve r/yon
the juice collector u. The fruit pulp regulator t
must lie on the grip and catch in the rabbet on
the grip.
6. Press the small squeezing cone e on the drive
axle iso that it engages.
Note:
If you want to press oranges or other larger fruits,
place the large squeezing cone wover the small
squeezing cone e. Ensure that the lobes of the
small squeezing cone eengage in the recesses of
the large squeezing cone w.
7. Inser t the power plug into a wall power socket.
The appliance is now ready for use.
IB_KH25_37658_LB6 01.10.2009 10:13 Uhr Seite 3