Leica FSC manuel dutilisation Assembly Transmitted Light, UV Illumination

7. Assembly

Transmitted Light

The transmitted illuminator is pre-installed in the factory.

•Screw the light guide with ø 9 mm (Fig. 12) onto the cold light illuminator (8.1).

•Place the cold light source next to the stand or onto the shelf that is to be screwed onto the base of the comparison macroscope (7.1).

•Insert the two light guide ends into the left and right receptacles on the transmitted light illu- minator (13.1).

•Connect the cables of the transmitted light il- luminator on both sides with the rear side of the stand (17.2, 17.3).

UV Illumination

•Screw the holder for UV lamps (14.1) onto the comparison bridge.

Fig. 12 Light guide ø 9 mm

•Insert the UV lamps (14.3) into this holder. Align them with the object and screw them tight.

Fig. 13 Transmitted light illuminator

1Connection for light guide

Fig. 14 Assembly of the UV illuminator 1 Holder for UV lamps

2 Rod for fastening a UV lamp

3 UV lamp

1

2

3

1

17