7. Assembly

7. Assembly

For instructions for assembling the stackable stages and various slide holders, please refer to Chapter “9. Accessories” page 31 ff.

!Caution!

The stages and slide holders have to be mount- ed before screwing in the objectives.

Only a few commonly used screwdrivers and keys are necessary for assembly, which are in- cluded in the delivery package.

!Caution!

First, remove the transport anchors (4.1).

Fig. 4 Stand with carrying handles

1Transport anchors

2Dovetail guide

2

1

1

7.1 Comparison Bridge

From above, set the comparison bridge onto the dovetail guide (4.2) and push the bridge downwards until the upper end of the dovetail guide is tightly fastened.

Fasten the comparison bridge using the side clamping screw.

7.2 Illumination

Either one or two cold light sources can be used. We recommend using the same cold light source for both sides based on the illumination method being used. A double-armed, flexible light line is included for this purpose. The sec- ond cold light source should then be used for another illumination method.

14

Page 14
Image 14
Leica FSC manuel dutilisation Assembly, First, remove the transport anchors, Comparison Bridge, Illumination