Leica FSC Accessories Bullet Holder, Adjustable holder with bullet holder assembly

9. Accessories

Bullet Holder

To assemble the bullet holder (36.1), slide the adapter sleeve in the segment guide down- wards to the “0” marking. Guide the bullet hold- er vertically to the adapter sleeve and fasten it with the knurled screw (36.2). Adjust the adapter sleeve horizontally again (slide upwards to the “90” marking) and press the rubber-coated pressure plate (37.3) into the conical bore of the adapter sleeve. After unscrewing the clamping screw (37.2), you can move the centering insert (37.3) horizontally in the bullet holder, thus ad- justing it to the length of the projectiles currently being compared.

Caution:

Before removing the unit, be sure there is sufficient distance between it and the objec- tive.

Fig. 36 Adjustable holder with bullet holder (assembly)		Fig. 37 Adjustable holder with bullet holder
1	Bullet holder	1	Rubber-coated pressure plate
2	Fastening screw	2	Clamping screw
		3	Centering insert with spring system
		4	Bullet

1 4 3

1

2

2

34