9. Accessories

9. Accessories

A specially developed work table and correctly sized work chair allow ergonomically opti- mized work.

In addition to various optical accessories, such as filters and stage scales, a number of different slide holders can be used.

9.1 Motorized Work Table

The work table with motorized height adjust- ment is designed for optimum ergonomic condi- tions when working at the comparison macro- scope.

Its table surface measures 120 cm x 56 cm and it is mounted symmetrically on the height-adjust- able column.

Fig. 30 Motorized work table

1Buttons for height adjustment

2Adjustable-height feet

Caution:

When setting up the comparison macro- scope, make sure that the stand is positioned exactly over the adjustable-height column.

After the power supply is connected, the work table can be continuously adjusted within a range of approx. 62 to 92 cm over floor height. To do so, use the buttons (30.1).

The lifting speed is approx. 12 mm/sec. The lift- ing capacity is approx. 2000 N.

If the floor on which the work table is installed is not completely level, differences in level can be compensated for by screwing the feet (30.2) in or out.

1

2

30

Page 30
Image 30
Leica FSC manuel dutilisation Accessories, Motorized Work Table