9. Accessories

9.3 Slide Holder

Adjustable holder with integrated rotating stage

Fasten the adjustable holders (universal hold- ers) (35.1) to the motorized cross-stage using the two screws (35.4).

After the clamping screw (35.3) is released, the universal holder can be moved sideways. This is especially useful for long, horizontally clamped pieces of evidence.

You can adjust the adapter sleeve (35.6) in the segment guide to an angle of up to 90° after re- leasing the clamping screw (35.2).

The adapter sleeve itself has a rotation device with gradation (35.7) and can be fixed into place using the clamping screw. The receptacles for pieces of evidence listed below can be inserted into the conical bore of the adapter sleeve (35.6).

After the clamping screw (35.5) is unscrewed, the entire unit can be rotated around its own axis.

Fig. 35 Adjustable holder

1Adjustable holder

2Locking device: angle adjustment of the adapter sleeve

3Locking device: lateral adjustment of the holder

4Fastening onto stage

5Locking device: rotation of the holder

6Adapter sleeve

7 Rotating device with graduation and clamping screw

1

7

6

2

5

3

4

33

Page 33
Image 33
Leica FSC manuel dutilisation Slide Holder