9. Accessories
Shotgun shell casing holder
The shotgun shell casing holder (42.1) has three spring rods rounded at the edges (42.2), to which shotgun shell casings (43.1) of various calibers can be attached. The conical base (43.2) is provided for centering the shell casings.
Wire holder
In the wire holder (44.1), round parts between
0.6mm and 8 mm in diameter can be clamped in order to (for example) examine cutting marks.
Receptacles for locking cylinders
Using an underlay of plasticine, these recepta- cles (45.1) can be used to securely fasten lock cylinders of safety locks bearing toolmarks.
Fig. 42 Adjustable holder with shotgun shell casing holder
1Shotgun shell casing holder
2Spring rods
2
1
Fig. 43 Adjustable holder with shotgun shell casing holder
1Shotgun shell casing
2Conical base
2
1
Fig. 44 Adjustable holder with wire holder
1Wire holder
1
Fig. 45 Adjustable holder with receptacle for locking cylinders
1Receptacle for locking cylinder
1
37
